New Woodworking Tools and New Woodworking Products

The Panel Mate Series of CNC Routers

Friday, 26 June 2009 19:55

THE PANEL MATE SERIES of CNC routers was recently introduced by C.R. Onsrud Inc. Each router comes standard with a 4x4, 4x8 or 5x10 full-coverage table; HSD 9-spindle multi-drill block option; 8- or 10-position tool changer rack; Express Software by ArtCAM; Becker vacuum pump; high-flow vacuum table; and a full rack of tool holders with chuck nuts. Contact: C.R. Onsrud Inc. Tel: 800-638-8185. www.cronsrud.com
   

Standard-Duty Diverter

Friday, 26 June 2009 19:51

STANDARD-DUTY DIVERTER, from Nordfab Ducting, exhausts air only from industrial machinery while it is operating. This increases suction at all other points in the system and reduces the amount of heated or cooled air exhausted from the work area, saving HVAC costs, according to the company. The unit carries a one-year warranty and can be manufactured from either galvanized or stainless steel. Contact: Nordfab Ducting. Tel: 800-532-0830. www.nordfab.com
   

Prisma Maxi double-blade miter saw

Friday, 26 June 2009 19:49

PRISMA MAXI double-blade miter saw, available from PAM Fastening Technology, provides low- to medium-volume frame shops with the flexibility to also accommodate larger moldings up to 7" wide and up to 3-1/4" deep. The machine has a unique horizontal cutting stroke and other design details to reduce blade vibration. All types of wood- and aluminum-covered frame material can be mitered and cut with very little setup time and minimum maintenance, according to the company. The unit’s fully enclosed design enhances safety by keeping the operator’s hands at a safe distance from the saw blades. Contact: PAM Fastening Technology. Tel: 704-394-3141. www.pamfast.com
   

Pam Fastening Screwdriver Accessory System

Friday, 26 June 2009 19:48

PAM FASTENING SCREWDRIVER ACCESSORY SYSTEM attaches to any drill/driver and firmly holds screws in position for insertion in any type of work area. The system is designed for one-hand operation thanks to a ball bearing system that securely holds Phillips square drive or PAMDrive recess screws. The E-Z Driver can be used for multiple tasks including installing drywall, sub-flooring, decking and railing, roofing, fencing, tile underlayment and other applications. The E-Z Driver comes standard with a Phillips and square drive bit and weighs less than 6 oz. It retails for $16.95, but for a limited time on Amazon.com is $8.95. Contact: PAM Fastening, 2120 Gateway Blvd., Charlotte, NC 28208. Tel: 704-394-3141. www.pamfast.com
   

Automatic Vacuum Switch

Friday, 26 June 2009 19:48

AUTOMATIC VACUUM SWITCH from Lee Valley runs a shop vacuum only when it is needed — in unison with a power tool. The switch is plugged into a regular 110-volt outlet, and the tool and vacuum are then plugged into the switch. When the circuitry senses the tool drawing power, the vacuum automatically turns on. The vacuum operates until six seconds after the tool is turned off to clear the hose. The unit comes with two 110-volt, 15-amp input cords — one 6' long, the other 18" long. The Lee Valley vacuum switch sells for $39.50. Contact: Lee Valley Tools Ltd., P.O. Box 1780, Ogdensburg, NY 13669-6780. Tel: 800-871-8158. www.leevalley.com
   

Page 69 of 94